Home of
Master Wipe®
Way Wipers
STANDARD CHIP DEFLECTORS
All deflectors are + 1/8 of your way size. Alter to suit your applications.
Bermar Chip Deflectors
are made of 16 gauge cold-rolled steel (16 GA CRS) and preformed to fit specific way wipers. These
deflectors are ideal for hot chip applications and as stiffeners for added strength. When chip
deflectors are applied, machine ways and way wipers are protected from damage by metal chips. Available
in some standard sizes, deflectors can be fabricated to additional size specifications per your request,
with or without hole patterns. Straight strip deflectors are useful (up to four feet long) for special
applications. The chart below lists stock sizes for rectangular and straight strip deflectors. Metal options for straight strip wipers include galvanized as well as cold-rolled steel.
- Slide wiper into position.
- Place deflector over wiper.
- Insert all screws. Leave loose.
- Use 1/16 x 90° shim under lip of
deflector. - Use 6" scale. Apply pressure 90°
leg of wiper. Hold deflector against
1/16 shim. - Same procedure across top of wiper.
Then around remaining sides. Remove
shim.
|
Model No. |
A |
B |
|
CD-2010 |
2.125 |
1.125 |
|
CD-2011 |
2.125 |
1.250 |
|
CD-2210 |
2.375 |
1.125 |
|
CD-2510 |
2.625 |
1.125 |
|
CD-2511 |
2.625 |
1.25 |
|
CD-2512 |
2.625 |
1.375 |
|
CD-3012 |
3.125 |
1.375 |
|
CD-3113 |
3.25 |
1.50 |
|
CD-3516 |
3.625 |
1.75 |
|
CD-3712 |
3.875 |
1.375 |
|
CD-3715 |
3.875 |
1.625 |
|
CD-4016 |
4.125 |
1.750 |
|
CD-4020 |
4.125 |
2.125 |
|
CD-4217 |
4.375 |
1.875 |
|
CD-4515 |
4.625 |
1.625 |
|
CD-4722 |
4.875 |
2.375 |
|
CD-5212 |
5.375 |
1.375 |
|
CD-5525 |
5.625 |
1.375 |
|
CD-6025 |
6.125 |
2.625 |
|
Model No. |
Width |
Length - A |
|
CD-1 x 12 |
1 |
12 |
|
CD-1 x 24 |
1 |
24 |
|
CD-1 x 33 |
1 |
33 |
|
CD-1 x 36 |
1 |
36 |
|
CD-1 x 48 |
1 |
48 |
