Services &
Capabilities
Custom Plastic Injection
Molding Manufacturing
Services
Plastic Injection Mold
Repair, Mold Making
& Fabrication Manufacturing Services
In-House Custom
Plastic Part Design &
Product Development
Manufacturing Services
Project GalleryCNC Machined &
Injection Molded Firearm
Lens Scope Dust Covers
Custom Injection Molded
PVC Funnels &
Polypropylene Screens
Overmolded Steel &
Urethane Seals
Manufacturing
CNC Machined Custom
Injection Molded Paint
Masks
Master Wipe Way Wipers Master
Wipe®
Way
Wipers
For over 40 years, Master Wipe® Way Wipers have been the first choice for machine way protection. Master Wipe® Way Wipers afford machinery builders longer-lasting, more economical and more efficient wipers than any of our competitors. With the additional capability to withstand most corrosive fluids and sprays, Master Wipe® remains the industry standard.

Master Wipe® Way Wipers

(click on thumbnail to enlarge)

Master Wipe® Way WipersWithout Master Wipe® Way Wipers, your machine could have dirty ways! Way wipers are similar to the wipers on your car windshield. Just as they wipe the rain and snow from your windshield for clear visibility, way wipers protect machine ways from dirt, grinding dust, metal chips, and excess oils for smooth and efficient movement. Ways serve as guides for movable parts on a machine. As the movable parts travel across the ways, they must be kept clean in order for the machine to operate properly. Excess debris can impede maximum performance of a machine's operation and even cause damage to the ways. To ensure the longevity of the ways and avoid costly repairs, way wipers need to be replaced on a regular basis.

For over 40 years, Master Wipe® Way Wipers have been the first choice for machine way protection. Master Wipe® Way Wipers afford machinery builders longer-lasting, more economical and more efficient wipers than any of our competitors. Master Wipe Way Wipers, have the capability to withstand most corrosive fluids and sprays, Master Wipe® remains an industry standard. They are made from a special blend of polyurethane and require metal chip deflectors only for hot applications and certain hole pattern specifications. It is no surprise that original equipment manufacturers (OEMs) and machinery rebuilders continue to order the wiper, which can endure the wear and tear of daily production.

Now Available:
Try our new wiper material with a higher resistance to water-soluble chemical coolants. Just another way that Master Wipe® continues to provide innovative products!

We invite you to sample our product. Contact us by e-mail, fax or telephone for a Master Wipe® sample that meets your way specifications. Discover what a quality wiper can do for your machines. Volume discounts are available.

Custom Master Wipe® Way WipersMaster Wipe® Metric WipersRectangular Master Wipe® Way Wipers 4" to 12" WidthStraight Strip Master Wipe® Way Wipers Master Wipe® Dovetail WipersRectangular Master Wipe® Way Wipers 1" to 3" WidthRound Bar Master Wipe® Way WipersMaster Wipe® V-Wipers

Custom Master Wipe® Way Wipers

Master Wipe® Way Wipers
Master Wipe® Way Wipers
Master Wipe® Way Wipers
Master Wipe® Way Wipers
 

Master Wipe® custom way wipers are a 40-year tradition at Bermar Associates, Inc. We specialize in designing way wipers to meet your machine specifications. A vast range of unique features from multi-level to multi-faceted wiper lip configurations are displayed in the pictures below. For your application needs, we can vary the raw material hardness and add molybdenum (moly) for greater lubrication and lower coefficient of drag on your machine ways. Plus, we pride ourselves on creating wiper systems that offer interchangeable parts, such as right-hand and left-hand components, intricate corners, molded metal inserts, and metal stiffeners which can be assembled on the wiper. Our cost-effective methods, including tooling and machining, will meet the most economical budget. Whether your needs are for 1 or 100 wipers, contact us for a personalized quotation.

Master Wipe® Dovetail Wipers

Master Wipe® dovetail wipers are designed for a close fit on dovetail ways. Each dovetail wiper can be used for inside or outside ways. Our dovetail wipers are preset to minus .015/.020 (A-B) with fitting stock added to the ends for your individual needs. Upon request, truss head screws (1/4-20 x 5/8) will be furnished at no additional charge. Master Wipe® dovetail wipers are engineered for maximum endurance and quality.

Standard Dovetail Cross Section
Standard Dovetail Cross Section

Model No. A B C D
WD-37 .375 1.125 2.25 .375
WD-50 .5 1.6875 3.5 .625
WD-62 .625 2 4.25 .75
WD-75 .75 3 6.5 1
WD-87 .875 3.125 6.5 1
WD-100 1 3.5 7 1
WD-125 1.25 4 8 1
WD-150 1.5 4.75 9.25 1
WD-175 1.75 5.5 10.25 1
WD-200 2 5.5 10.25 1

back to top

Master Wipe® Metric Wipers

Rectangular Metric Wipers Diagram
Rectangular Metric Wipers Diagram
Metric matters with Master Wipe® Way Wipers. Our metric wipers, like our standard rectangular wipers, provide maximum way cleaning capability. Stock sizes are limited (see chart below), but specific customer requirements can be accommodated.
 
Master Wipe® Way Metric Wipers - Style 1
Master Wipe® Metric Wipers - Style 1
An optional style wiping lip is a feature unique to Master Wipe® Metric Way Wipers. Two styles are offered for your machine ways. Style 1 is our standard wiping lip. It provides firm wiping with a thick lip that forms an 8° angle. For those wiping operations requiring low pressure and reduced drag, the Style 2 wiping lip would be a suitable choice. This thin-lip style forms a 45° angle. Style 2 allows greater flexibility on the wiping edge, while maintaining maximum performance. The drawings below offer greater detail to help you make the proper selection.
Model No. A B C D
9535 95 35 145.8 85.8
10070 100 70 150.8 120.8
110100 110 100 160.0 150.0
11040 110 40 160.8 90.8
12050 120 50 170.8 100.8
12750 127 50 177.8 100.8
15030B* 150 30 203 80.8
15055 150 55 200.8 105.8
15060 150 60 200.8 110.8

All units are mm. *Denotes wiper has a 1.5 chamber in corners of wiping area and two sides of border are 26.97 wide.

Master Wipe® Way Metric Wipers - Style 2
Master Wipe® Metric Wipers - Style 2

Moly-filled metric wipers are new to Master Wipe®. For those applications requiring lower coefficient of drag and less stacking height, our thin-bodied metric wipers, filled with moly, offer a superior alternative. Style 2 is the only wiping lip available for the moly-filled wipers. Stock sizes are listed below with custom options available.

Model No. A B C D
2424B* 24 24 48 48
4040B* 40 40 69.4 69.4
9930 99 30 128.4 59.4
15050 150 50 179.4 79.4
22650 226 50 255.4 79.4

Master Wipe® Metric Wipers
Master Wipe® Metric Wipers
All units are mm. The wipers above are moly-filled. * Denotes 2424 wiper has a hole pattern in 4 corners and nonstandard border. The 4040 wiper has a hole pattern at midpoint each side.

back to top

Rectangular Master Wipe® Way Wipers 1" to 3" Width

Black Rectangular Wipers
Rectangular Wipers

Unsurpassed in durability and quality, Master Wipe® rectangular wipers are stocked for most standard sizes of way bars. Special sizes, hole patterns, left and right wiper mates, and other custom designs can be produced to suit your application. All rectangular wipers are preset to minus .030/.040 (A-B). Mounting screws (1/4-20 x 5/8 truss head) are furnished at no extra charge upon request.

An optional style wiping lip is a feature unique to Master Wipe® rectangular way wipers. Two styles are offered for your machine ways. Style 1 is our standard wiping lip. It provides firm wiping with a thick lip that forms an 8° angle. For those wiping operations requiring low pressure and reduced drag, the Style 2 wiping lip would be a suitable choice. This thin-lip style forms a 45° angle. Style 2 allows greater flexibility on the wiping edge, while maintaining maximum performance. The drawings below offer greater detail to help you make the proper selection.

Style 1 & 2 Rectangular Master Wipe® Way Wipers 1
Style 1 & 2 Rectangular Master Wipe® Way Wipers 1" to 3"
 
Model No. A B
1212B* 1.25 1.25
1507 1.5 .75
1515 1.5 1.5
1707 1.75 .75
1710 1.75 1
1710B* 1.75 1
1712 1.75 1.25
2007 2 .75
2008 2 .875
2010 2 1
2011B* 2 1.125
2012 2 1.25
2020 2 2
2110 2.125 1
2111 2.125 1.125
2117 2.125 1.75
2210 2.25 1
2212 2.25 1.25
2311 2.375 1.125
2312 2.375 1.25
2315 2.375 1.5
2510 2.5 1
2511 2.5 1.125
2512 2.5 1.25
2513 2.5 1.375
     
 
Model No. A B
2515 2.5 1.5
2525 2.5 2.5
2712 2.75 1.25
27130 2.75 1.3125
2717 2.75 1.75
2727 2.75 2.75
2812 2.875 1.25
2813 2.875 1.375
2815 2.875 1.5
2828 2.875 2.875
3007 3 .75
3007B* 3 .75
3010 3 1
3012 3 1.25
3013 3 1.375
3015 3 1.5
3023 3 2.375
3025 3 2.5
3030 3 3
3113 3.125 1.375
3212 3.25 1.25
3213 3.25 1.375
3215 3.25 1.5
3220 3.25 2
33017 3.3125 1.75
     
 
Model No. A B
3311 3.375 1.125
3313 3.375 1.375
3315 3.375 1.5
3316 3.375 1.625
3317 3.375 1.75
3508 3.5 .875
3511 3.5 1.125
35106 3.5 1.0625
3512 3.5 1.25
3513 3.5 1.375
3515 3.5 1.25
3516 3.5 1.625
3517 3.5 1.75
3520 3.5 2
3525 3.5 2.5
3615 3.625 1.5
3620 3.625 2
3712 3.75 1.25
3713 3.75 1.375
3715 3.75 1.5
3717 3.75 1.75
3720 3.75 2
3722 3.75 2.25
38081 3.875 .8125
3810 3.875 1
3811 3.875 1.125

* Denotes nonstandard wiper

back to top

Rectangular Master Wipe® Way Wipers 4" to 12" Width

Master Wipe® Way Wipers
Rectangular Wipers

Unsurpassed in durability and quality, Master Wipe® rectangular wipers are stocked for most standard sizes of way bars. Special sizes, hole patterns, left and right wiper mates, and other custom designs can be produced to suit your application. All rectangular wipers are preset to minus .030/.040 (A-B). Mounting screws (1/4-20 x 5/8 360" truss head) are furnished at no extra charge upon request.


An optional style wiping lip is a feature unique to Master Wipe® rectangular way wipers. Two styles are offered for your machine ways. Style 1 is our standard wiping lip. It provides firm wiping with a thick lip that forms an 8° angle. For those wiping operations requiring low pressure and reduced drag, the Style 2 wiping lip would be a suitable choice. This thin-lip style forms a 45° angle. Style 2 allows greater flexibility on the wiping edge, while maintaining maximum performance. The drawings below offer greater detail to help you make the proper selection.


Rectangular Master Wipe® Way Wipers 4 to 12 Styles 1 & 2
Rectangular Master Wipe® Way Wipers 4" to 12" Styles 1 & 2
Model No. A B
4010 4 1
4012 4 1.25
4015 4 1.5
4016 4 1.625
4017 4 1.75
4017B* 4 1.75
4020 4 2
4020B* 4 2
4025 4 2.5
4030 4 3
4040 4 4
4215 4.25 1.5
4217 4.25 1.75
4220 4.25 2
4515 4.5 1.5
4517 4.5 1.75
4520 4.5 2
4521 4.5 2.125
4522B* 4.5 2.25
4530 4.5 3
4715 4.75 1.5
4717 4.75 1.75
4718 4.75 1.875
4720 4.75 2
47216 4.75 2.15625
4722 4.75 2.25
     
 
Model No. A B
4725 4.75 2.5
4737 4.75 3.75
4747 4.75 4.75
4820 4.875 2
4825 4.875 2.5
5012 5 1.25
5013B* 5 1.375
5015 5 1.5
5017 5 1.75
5020 5 2
5022 5 2.25
5025 5 2.5
5040 5 4
5216 5.25 1.625
5225 5.25 2.5
5522B* 5.5 2.25
5525 5.5 2.5
5530 5.5 3
5616 5.625 1.625
5712 5.75 1.25
5727 5.75 2.75
5730 5.75 3
6015B* 6 1.5
6020 6 2
6022 6 2.25
6025 6 2.5
     
 
Model No. A B
6030 6 3
6060 6 6
6210 6.25 1
6525 6.5 2.5
6526 6.5 2.625
6526B* 6.5 2.625
6735 6.75 3.5
7015 7 1.5
7020 7 2
7025 7 2.5
7025B* 7 2.5
7030 7 3
7326 7.375 2.625
7512 7.5 1.25
7525 7.5 2.5
7820 7.875 2
7931 7.9375 3.125
8020B* 8 2
8030 8 3
8031 8 3.125
8035 8 3.5
8510B* 8.5 1
8553 8.5 5.375
9710 9.75 1
10030 10 3
10060 10.0 6.0
12816 12.875 1.625

* Denotes nonstandard wiper

back to top

Round Bar Master Wipe® Way Wipers

Round Bar Master Wipe® Way Wipers
Round Bar Master Wipe® Way Wipers
Master Wipe® round bar wipers fit easily on round guide bars and round ways. Our stock bar wipers range from .750 - 8.000 in varying increments. Custom sizes can be produced per your request. Wipers are minus .030/.040 preset and bolt hole patterns and hole diameters can be fabricated to your specifications. These round wipers will stop metal chips and dirt from reaching the shaft-bearing surface. Long-wear polyurethane and the single lip design give excellent resistance to the effects of weather while remaining undamaged by most oils and coolants.

Round Bar Master Wipe® Way Wipers Style 1 & 2
Round Bar Master Wipe® Way Wipers Style 1 & 2
Model No. Bar Dia. I.D. O.D. A
RD-.750 .75" .750 2.250 .750
RD-1.000 1" 1.000 2.500 .750
RD-1.250 1.25" 1.250 2.750 .750
RD-1.375 1.375" 1.375 2.880 .750
RD-1.500 1.5" 1.500 3.000 .750
RD-1.625 1.625" 1.625 3.125 .750
RD-1.750 1.75" 1.750 3.250 .750
RD-2.000 2" 2.000 3.500 .750
RD-2.500 2.5" 2.500 4.000 .750
RD-2.750 2.75" 2.750 4.500 .875
RD-3.000 3" 3.000 4.500 .750
RD-3.250 3.25" 3.250 5.000 .875
RD-3.500 3.5" 3.500 5.500 1.000
RD-4.000 4" 4.000 5.500 .750
RD-5.000 5" 5.000 7.000 1.000
RD-5.500 5.5" 5.500 7.350 .925
RD-6.000 6" 6.000 8.000 1.000
RD-6.500 6.5" 6.500 8.500 1.000
RD-6.750 6.75" 6.750 8.750 1.000
RD-7.000 7" 7.000 9.000 1.000
RD-8.000 8" 8.000 10.000 1.000

back to top

Straight Strip Master Wipe® Way Wipers

Straight Strip Master Wipe® Way Wipers
Straight Strip Master
Wipe® Way Wipers
Straight Angle Strip Wiper Outside Corner (OSC)  

Master Wipe® straight strip wipers can be provided in any length, per your specifications, up to eight feet. Standard strips are one inch wide with a preset of minus .015/.020 (A-B). Other widths are available (see chart below). Truss head screws (1/4-20 x 5/8) are furnished at no additional charge upon request. Strip deflectors can be mated to the wiper strips in sizes up to four feet in length.

Straight Strip Master Wipe® Way Wipers
Straight Strip Master Wipe® Way Wipers

NOTE: Strip Chip Deflectors available upon request in most sizes. All wipers are minus .030/.040 preset A-B. Alter to suit your application. Screws furnished upon request, N/C (1/4 - 20 x 5/8 truss head). Style 2 lip design available up to 24" long.

Model No. A B C D
WS-10 x 8' 1.00 .38 .25 8'
WS-10 x 24" 1.00 .38 .25 24"
WS-10 x 32" 1.00 .38 .25 32"
WS-10 x 48" 1.00 .38 .25 48"
WS-12 1.25 .38 .25 24"
WS-15 1.50 .38 .25 24"
WS-17 1.75 .38 .25 24"
WS-20 2.00 .38 .25 24"
WS-25 2.50 .38 .25 24"
WS-30 3.00 .38 .25 24"
WS-2558 .50 .25 .13 8"
WS-10-OSC 1.00 .38 .25 6"

back to top

Master Wipe® V-Wipers

Master Wipe® V-Wipers are designed to fit a variety of V-shaped ways. A firm wiping edge keeps the machine way clean and free from debris. Two types are offered: V-Open Frame (VOF) and V-Full Frame (VFF). In addition to the stock sizes shown below, custom V-Wipers can be made to suit your specifications. Stock V-Wipers are available in Style 1 lip design only (see rectangular wipers). Custom lip designs quoted upon request.



Open V Master Wipe® Wiper Full Frame V Master Wipe® Way Wipers  


Model No. A B C D E F G H J K
VFF-10 1.250 2.000 .500 1.080 3.175 3.925 1.000 45° .187R .500
VFF-20 1.750 3.750 1.625 1.562 3.150 5.750 1.000 45° .375R .687
VFF-30 2.000 4.000 .937 2.125 4.000 6.000 1.000 45° .250R .500
VFF-40 2.437 3.500 .500 2.125 4.500 5.500 1.000 45° .187R 1.000
VFF-45 2.750 4.000 .500 2.480 4.500 5.750 .875 45° .250R 1.000
VFF-50 2.500 5.500 1.625 2.750 4.500 7.500 1.000 45° .125R .575
VFF-60 2.500 5.500 2.000 2.500 4.500 7.450 1.000 45° .125R .710
VOF-10(SW-45) .750 1.625 .125 1.062 1.730 2.220 1.000 45° .125R -
VOF-20 .875 2.000 .250 1.230 1.875 5.400 1.00 45° .187R -
VOF-30 1.125 2.425 .250 1.580 2.125 5.420 1.000 45° .187R -

back to top

Custom Injection Mold building - Bermar Associates